IEMN
  • Accueil
  • Actualités
    • Newsletters de l’IEMN
    • Offres de Stages M2-Ingé
    • Les offres d’emplois
    • Toutes les actualités
  • L’Institut
    • Présentation
    • Organisation de l’institut
    • La Direction Scientifique
    • La Direction Technologique
    • La direction administrative et financière
    • Les docteurs & doctorants ont la parole
    • « Nos têtes chercheuses »
    • Règlement intérieur
    • Nos engagements
  • La Recherche
    • Les départements scientifiques
      • Matériaux Nanostructures et Composants
      • Micro/nano et optoélectronique
      • Technologies des télécommunications et Systèmes intelligents
      • Acoustique
    • Les groupes de recherche
    • Les projets phares
  • Production Scientifique
    • Publications IEMN
    • Ressources production scientifique
  • Les plateformes
    • CMNF – Plateforme Centrale de Micro Nano Fabrication
      • Pôle Gravure et implantation
      • Pôle Analyse In Line
      • Pôle Soft Lithographie et Bio Microfluidique
      • Pôle Dépôts et épitaxie
      • Pôle Lithographie
      • Pôle Packaging
      • Staff CMNF
    • PCMP – Plateforme de Caractérisation Multi-Physique
      • Pôle Microscopie en Champ Proche (PCP)
      • Pôle Caractérisation Hyperfréquence, Optique et Photonique (CHOP)
      • Pôle Systèmes de COMmunications avancées et prototypage (SigmaCOM)
      • Pôle Caractérisation et Compatibilité ElectroMagnétique et prototypage (C2EM)
      • Staff PCMP
    • Prestations proposées par nos plateformes
  • Partenariat – Valorisation
    • Les Collaborations Académiques
    • Projets ANR
    • Projets FEDER
    • Principales collaborations internationales
    • Les partenariats industriels
    • Les laboratoires communs IEMN-Industrie
    • Les startups
  • La Formation à la Recherche
    • Stages d’observation collège/lycée
    • L’après-thèse
      • Faire un post-doc à l’IEMN
      • Vers le monde des entreprises et de l’industrie
      • Devenir Enseignant-Chercheur
      • Devenir Chercheur
      • Créer son entreprise à l’IEMN
      • FOCUS sur un ingénieur SATT issu de l’IEMN
    • Une thèse à l’IEMN
      • Soutenances de thèses et HDR
      • Sujets de thèses
      • Les financements
      • Les études doctorales
    • Master – Ingénieur
      • Masters ULille
        • Master Life Sciences and Technologies graduate program
        • Master Nanosciences and Nanotechnologies – Speciality ETECH
        • Master Réseaux et Télécommunications
      • Masters UPHF-INSA
        • Master Ingénierie des Systèmes embarqués et Communications Mobiles
        • Master Cyber-Défense et Sécurité de l’information
        • Master Matériaux, Contrôle, Sécurité
        • Master Ingénierie des Systèmes Images et Sons
      • Écoles Ingé partenaires/tutelles
      • Offres de Stages M2-Ingé
    • Le pôle lillois du GIP-CNFM
    • Nano-École Lille
  • Contact
    • Localisation
    • Formulaire de contact
    • Annuaire Intranet
    • « Suivez-nous »
  • Nos soutiens
  • en_GB
  • Rechercher
  • Menu Menu
ACTUALITES

THESE : Victor VAILLANT – 08/12/26 – « Toward control of structure and physical properties of covalent architectures »

Victor VAILLANT

8 décembre 2026 à 10h00
Amphithéâtre de l’IEMN-Laboratoire central – Villeneuve d’Ascq

Jury :
  • Reviewer: CAMPIDELLI Stéphane, Senior Researcher, NIMBE – LICSEN – CEA Saclay
  • Reviewer: PALMINO Franck, Professor, FEMTO-ST – Université de Franche-Comté                              
  • Examiner: DAPPE Yannick, Directeur de recherche, C2N – Université de Paris-Saclay
  • Examiner: NONY Laurent, Associate Professor, IM2NP – Université d’Aix-Marseille
  • Guest: GODEY Sylvie, Research Engineer, CNRS – Université de Lille
  • Co-Director: LENFANT Stéphane, Senior Researcher,  CNRS – IEMN – Université de Lille
  • Director: KALASHNYK Nataliya, Professor, IEMN –Université de Lille
Abstract :

The work presented in this manuscript focuses on the surface growth, from various molecular precursors, of different π-conjugated materials: surface covalent organic frameworks (SCOFs), graphene nanoribbons (GNRs) and nanoporous graphene (NPGs). A supplementary study is devoted to investigating the growth parameters of monolayers of molecular switches (MSs), which enable the properties of these π-conjugated materials to be modified and controlled.

The first part focuses on the growth of SCOFs on Au(111) and Ag(111) single crystals, under ultra-high vacuum (UHV) and at room temperature (RT). Two triphenylamine derivatives functionalized with bromine atoms (BrTPA) and ethyl groups (ETPA) were deposited and subsequently characterized by scanning tunnelling microscopy (STM) at RT. For BrTPA, depositions on substrates at RT result in 2D domains arising from molecular self-assembly, whereas depositions on heated substrates result in porous, extended 2D domains formed via on-surface inter-molecular reactions, i.e., Ullmann coupling. A comparison of the structures shows that the choice of processes and their parameters influence the pore geometry and the size of the domains. For ETPA, deposition on both room-temperature and heated substrates resulted in dendrite-shaped molecular domains, with the exception of deposition on Au(111) kept at high temperature, which formed small 2D domains with ordered hexagonal pores. The formation of these structures was enabled by either Glaser coupling or cyclotrimerization, reactions that this molecule can undergo upon thermal activation, depending on the nature of the substrate. In conclusion, investigating the formation of SCOFs from triphenylene derivatives is important for understanding how rigid, π-conjugated molecular building blocks can be transformed into extended, atomically defined two-dimensional porous architectures on surfaces. Beyond their fundamental interest, such structures offer potential opportunities for molecular recognition, selective adsorption, catalysis, and the development of functional nanoscale electronic and optoelectronic devices.

The second part of this thesis was devoted to the study of the growth parameters of nonplanar ClAlPc molecules, which can adopt either a Cl-up or Cl-down orientation on the surface, as potential MSs. These molecules were deposited onto Au(111) maintained either at low temperature (LT) or at room temperature (RT) under ultra-high vacuum (UHV) conditions. The resulting structures were then characterized by STM at RT and LT, as well as by non-contact atomic force microscopy (nc-AFM) operated at LT. Using low-temperature scanning probe microscopy (SPM) techniques, isolated ClAlPc molecules adopting both Cl-up and Cl-down orientations were imaged and identified by both techniques. Deposition at higher molecular coverages was also investigated, enabling the formation of more extended molecular domains that exhibit highly ordered molecular network on the surface. STM imaging at RT and LT, together with nc-AFM imaging at LT, revealed that these structures consist of bilayers containing molecules in both orientations, stabilized by dipole interactions. These structures were obtained prior to the completion of the monolayer, which contradicts what is reported in the literature. A possible explanation is that the evaporation of the molecules occurs at a low rate, which favors the formation of this structure. These results were supported by simulations based on density functional theory and the probe particle model. In conclusion, the controlled growth and stabilization of nonplanar molecular switches, such as ClAlPc, at submonolayer coverage remains an important challenge for developing functional molecular architectures. The ability to reversibly control their conformation using external stimuli could provide a powerful strategy for dynamically tuning the structure and properties of SCOFs and other 2D materials, including nanostructured graphenes. In the longer term, such responsive molecular systems could enable reconfigurable nanoscale components for low-power electronics, high-density information storage, sensing, and adaptive materials.

The final part of this thesis focused on the growth of nanostructured graphenes either from TBDBTP or TBB molecules deposited on an Au(111) substrate in UHV conditions. The evaporation of TBDBTP molecules onto the substrate at room temperature led to the formation of self-assembled molecular domains. Subsequent annealing triggered an Ullmann coupling reaction, resulting in partially reacted molecular domains whose organization more closely resembled that of  nanoporous graphenes (NPGs) than that of graphene nanoribbons (GNRs). The resulting NPGs display a highly anisotropic morphology, characterized by non-planar pores arranged in a brick-wall-like pattern within the molecular layer Further optimization of the annealing conditions, including higher temperatures and longer annealing times, was explored to promote more complete intermolecular reactions. These experiments highlighted a competition between the Ullmann coupling reaction and molecular desorption, which influenced the resulting domain size and the degree of structural order within the NPGs at larger length scales. The forthcoming implementation of a new manipulator on the existing UHV system, enabling controlled deposition onto both cold and hot substrates, is expected to provide greater control over the growth conditions and, consequently, facilitate further optimization of the domain size and structural order of the resulting nanostructures Meanwhile, very recent experiments with TBB revealed a variety of surface assemblies, including a large proportion of isolated molecular rows and extended close-packed domains, together with a smaller number of ring-like and honeycomb-like porous islands. The latter structures could potentially correspond to an anticipated NPG featuring planar pores arranged in a honeycomb pattern, resulting in an isotropic structure. However, a metal–organic origin cannot be excluded, as surface coordination could also account for the porous networks observed by STM. The formation of the close-packed rows and domains built of 4-lobes features may likewise result from impurities, an unexpected reaction pathway, or specific molecular fragmentation upon adsorption followed by the assembly of the resulting species. Although further experiments are required to establish their precise nature, these recent observations open the possibility of accessing a range of distinct porous and close-packed structures from TBB, highlighting the potential of this molecular system for the formation of novel nanostructured architectures. In conclusion, the controlled synthesis of nanoporous graphenes (NPGs) and graphene nanoribbons (GNRs) represents an important step toward the development of advanced functional nanomaterials with potential societal impact. Their tunable electronic, chemical, and structural properties could contribute to future technologies for more efficient electronics, highly sensitive sensors, cleaner energy conversion and storage, and selective molecular separation. In the longer term, mastering the fabrication of such atomically precise carbon nanostructures may help enable smaller, more energy-efficient, and more sustainable technological devices.

Logo
Cité Scientifique
Avenue Henri Poincaré
CS 60069
59 652 Villeneuve d'Ascq Cedex, France
Tel : 03 20 19 79 79
CNRS Logo University of Lille Logo University Polytech Logo Junia Logo Centrale Lille Logo Renatech Logo RFnet Logo
Plan du site
© Copyright Service ECM et pôle SISR 2024
  • Production scientifique
  • Mentions légales
  • Politique de confidentialité
Faire défiler vers le haut
fr_FR
fr_FR
en_GB
Nous utilisons des cookies pour vous garantir la meilleure expérience sur notre site web. Si vous continuez à utiliser ce site, nous supposerons que vous en êtes satisfait.